INLET
DESK ( INFEED ARRANGEMENT)
 |
Sturdy
inlet desk driven by using heavy duty chain along with additional
worm reduction gear box. |
| Positively
driven top infeed roller with with A.C. motor and inverter to take
maximum under feeding and over feeding ( Instead of A.C. motor and
inverter, piv and selsyn motor can also be provided optionally) |
| Calibration
dial/pot/ indicator fabric tension and over feeding /under feeding |
| Positively
driven scroll rollers guide roll and A.C. motor or knitted fabric is
provided optionally |
| Machine
will be provided with photo sensor or electric feeler switch to
control infeed check optionally. |
| Gumming,
cutting, slitting edge spreader etc. for knitting and hosiery can
be provided optionally. |
|
OUTLET
DESK (DELIVERY ARRANGEMENT)
 |
MS
fabricated sturdy Outlet Desk with necessary girders to mount main
gear box and to allow width wise displacement according to fabric. |
| Chain
carrying C.I. rails is mounted on gear box. |
| Unit is
driven by D.C. Electric motor or can also be provided A.C. inverter
optionally |
| A.C. Motor
is also provided or width displacement |
| Outlet
roller drive with heavy duty variable pulleys or PIV (optionally)
for smooth running of fabric with positive speed variation with
respect to chain speed |
|
3
BOWL PADDER MANGLE / HIGH ENTRY WEFT & BOW
 |
3 Bowl
inclined type padding mangle with 10 ton nip pressure capacity with
pneumatic arrangement. |
| Sturdy
side frames with two nos. Stainless Steel troughs of adequate
capacity can be raised or lowered |
| Side
splash guards capacity to prevent chemicals from splashing and easy
return to though |
| Decorative
fabricated high entrance with necessary rollers and cloth guiders
for centering of fabric |
|
Mechanical
compensator is provided ( Pneumatic, Compensator can be provided
optionally). |
| Driven by
DC Motor and gear box or ( A.C. inverter can be provided
optionally). Mechanical weft & Bow driven by geared motor to
reduce the skew problem |
|
CLOSED
CIRCUIT CHAMBER
|
Modular
design - optimum accessibility . |
| Space
saving construction - which required less heat to heat
chambers |
| Unique
chamber structure makes uniform air velocity and temperature
distribution by increase of hot air circulation. |
| Paneling
is of high density insulating material for low heat radiation |
| No
slippage due to direct mounting of impellers on motor |
| Radiator
side bottom and top doors are hinged type to open and close so as to
clean radiator filter screen with out stopping Machine |
| Reduced
nozzle distance ( Only possible with pin operation) results in
higher evaporation |
| Direct gas
fired system can be provided optionally with automatic control |
| Dual
filter screen - cleaning is possible even during machine is in
operation. as a second filter is installed just before radiator . |
| Entry and
delivery frame are also provided with high density insulated panels
covering. |
| Double
speed A.C. Motors or ( Single speed AC Motors optional with AC
Inverter ) for high efficiently backward curved radial fans |
| Air locks
at the fabric entry & exit opening |
|
PLAITER
BATCHING
 |
Fabricated
decorative plaiter and batching mounted with outlet desk |
| Separate
D.C. Motor helps to take moderate load of batching and plaiting (
A.C. inverter can be provided optionally. |
| Batching
the fabric is possible up to 1800mm diameter with facility to
lowering and rising of batching arm pneumatically. |
| Ascending
batch winder for smaller batch in open type trolleys for
tensionless outlet |
|
COCK
PIT
 |
Sophisticated
decorative cock pit having electrical controls, speedometers ampere
meter , volt meter weft and bow controls are of easy accessible to
the operator |
|
|
|
MECHNICAL
PINNING SYSTEM
 |
 |
Mechanical
selvage control & selvage pinning device with two finger / three
finger uncurler arrangement or smooth pinning o fabric |
|
CONTROL
PANEL
 |
MS
fabricated control panel with its readily accessible circuitry,
housed the necessary switch gears, Fuses, mcbs. Main Switch,
transformers, inverters (optional) cables cable trays synchoro cad
etc for all electric function and is according to latest advances in
electrical engineering |
| Panel
shows total current consumption of the machine with the help of
control transformer |
|
CHIAN
ASSEMBLY
 |
The fabric
is conveyed by pins or clip or combination of pin or clip . The
special aluminum alloy die casting top parts or high grade M.S.
Fabricated top parts are mounted on steel graded chain with self
lubricated sintered bronze shoes. |
 |
The chain
sliding over the graded cast iron machine lapped chain rail for
smooth moving and minimum friction which reduces load on driving
motor in terms saves electrical energy |
|
|
|
OIL RADIATOR
 |
Spirally
wound finns with heavy duty pipe , Header Etc. |
|
|
|
BLOWER
IMPELLER
 |
Dynamically
balanced heavy duty radial fans directly mounted on double
speed A.C. motor / Single Speed A.C. Motor and housed in well
fabricated and insulated doors |
|
|
|
CHAMBER
CONFIGURATION
 |
Gas Fired
Chamber, easy accessibility burner arrangement with optimum fresh air
supply. |
| Oil Steam
radiator chambers, large heat exchanger surface area for quick
heating |
|
|
MODULAR
CHAMBERS
 |